Weathershield™ Roof

Sheen Finish

High durability acrylic roof paint with Keep Cool™ and Colourlock™ technology; and protects against mould attack





Key Information

Coverage20 m²/5L

Drying Time2 - 3 Hours

Product Enquiry

Ask us anything related to this product. We will get back to you as soon as possible.

Ask Us

Product Description

Weathershield™ Roof is a high durability acrylic emulsion heat reflective roof paint with Keep Cool™ & Colourlock™ technology; protects against mould attack.

Download PDF

1. To read more on the product, select the PDF you wish to download.

2. Please enter your email address into the form below to download PDF.


  • Keep Cool™ heat reflective technology. Reduces exterior surface temperature by up to 5°C, resulting in savings up to 15% per annum on the energy used to cool the home*
  • Colourlock™ technology to ensure colour stay looking new for longer
  • Resists peeling and fading due to weathering
  • Protection against fungus and algae growth
  • Excellent alkali resistance with Alkali Guard technology
  • Resists dirt pick up, surface stays clean and bright longer
  • Excellent adhesion property
  • Excellent exterior durability
  • Resist discoloured patches from dampness
  • Effective mould control
  • Certified to Singapore Green Labelling Scheme
  • *based on tests conducted by BSD Singapore and applicable to selected colours.

Tips & Advice

Surface Preparation

Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose or defective paint or powdery residues by thorough brushing and scraping, using a stiff fiber brush and high pressure water jet. Treat any areas affected mould, lichens, algae and moss with Dulux Professional Fungicidal Wash. Repair any surface defects with an appropriate filler. Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with one coat of an appropriate Sealer (see below System Recommendation). Do not paint if the wall is saturated with dampness. (Protimeter reading higher than 16%). Allow excess moisture to evaporate.

Application Tools

By roller, brush or conventional/airless spray.


Ready to use. Dilute up to 10% with potable water when necessary if application by brush or roller. For conventional spray application, thin up to 10 - 20%.

Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and colour.