Exterior

Exterior Sealer E500

Matt Finish

Water-based sealer for exterior and interior surfaces

Healthcare

Residential

Education

Commercial

Key Information

Coverage9 - 11 m²/L


Drying Time2 - 4 Hours

Product Enquiry

Ask us anything related to this product. We will get back to you as soon as possible.

Ask Us

Product Description

Dulux Professional Exterior Sealer E500 is a water-based sealer for both exterior and interior masonry surfaces. It provides good adhesion to the substrate and forms a barrier for better topcoat finishing.

Download PDF

1. To read more on the product, select the PDF you wish to download.

2. Please enter your email address into the form below to download PDF.

Features

  • Provides good alkali and efflorescence resistance
  • Certified to Singapore Green Labelling Scheme

Tips & Advice

Surface Preparation

Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose or defective paint or powdery residues by thorough brushing and scraping, using a stiff fiber brush and high pressure water jet. Treat any areas affected mould, lichens, algae and moss with Dulux Professional Fungicidal Wash. Repair any surface defects with an appropriate filler. Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with one coat of an appropriate Sealer (see below System Recommendation). Do not paint if the wall is saturated with dampness. (Protimeter reading higher than 16%). Allow excess moisture to evaporate.

Application Tools

By roller, brush or conventional/airless spray.

Dilution

Ready to use. Dilute up to 10% with potable water when necessary if application by brush or roller. For conventional spray application, thin up to 30%.

Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and colour.